هوايه..بلاحدود

Information in Arabic!

Speed Control from Hobby Wing, a leading manufacturer of electrical parts for remote control cars.

Speed control is designed for 1/5 scale cars, whether Buggy or Lucy.

Note that it can be used on 1/8 and 1/7 cars and is considered a very powerful modification and gives significant results.

Product Information: EZRUN MAX5-V3

Version: v3

Color: Black

SKU: 30104000

Ampere: 200 Ampere

Designed for Pershil motors

Integrated with it are black electrical wires that connect the motor and the speedometer.

• It can be used on batteries from 3 to 8 cells.
• The cooling fan port can be used to program the speed control with the Hobbywing programming card (programming card sold separately)
• The maximum limit that can be used with 1000KV motors is designated for 1/5 motors, noting that the speed can be used on most 1/8 motors.
• A dedicated fish to turn the speed on and off, and this is a very safe feature that some speeds do not provide.
• Weight 342g
• Dimensions

Length: 93.35 MM

Width: 58.12 MM

Height: 47.81 MM

The software of the Speed can be upgraded using the digital programming card.

1/5th E-conversion

UBER UPGRADE

HPI BAJA, LOSI 5IVE, DESERT BUGGY XL + more

What is the box?

• (1) Ezrun MAX5 ESC
• (3) 10 AWG, 200C Black wires for a brushless motor
• (1) Extra set of 8 AWG 200C RED power wire
• (1) Extra set of 10 AWG 200C Black power wire
• (1) Double side tape
• (2) Heat shrink tube
• User's manual
• A HOBBYWING decal

Bottomline

• Compatible with sensorless brushless motors and sensored brushless motors (only in sensorless mode).
• Fully waterproof design for all weather conditions.
• Super internal switch-mode BEC with switchable voltage of 6V/7.4V and a cont. /peak current of 6A/25A for easily driving big torque servos and high voltage servos.
• Highly reliable electronic switch avoids troubles which may happen to traditional mechanical switch due to dirt, water, dash and etc.
• The built-in spark-proof circuit effectively protects not only battery and ESC connectors from damage but also users from physical injury (to hands) caused by strong electrical sparks
• Produced at the battery and ESC connecting moment.
• Separate programming port to easily connect the LED program card or the LCD program box to the ESC. (purchase separately)
• Proportional brake with 9 levels of brake amount/maximum brake force and 9 levels of drag brake force.
• 5 levels of acceleration / punch from soft to aggressive for different vehicles, tires and tracks.
• Multiple protections: motor lock-up protection, low-voltage cutoff protection, thermal protection, overload protection, and fail safe (throttle signal loss protection).
• Capacitor Protection(Only MAX5)：Innovative Capacitor Protection effectively protects capacitors from exploding and causing irreversible damage to the ESC because of overload.
• Single-button ESC programming and factory reset.
• Advanced programming via portable LED program card or multifunction LCD program box. (purchase separately)
• Firmware upgrade via HOBBYWING multifunction LCD program box (item sold separately).

Specifications

Ezrun Max 5 MAX5

IMPORTANT CHECKLIST:

• Ensure all wires and connections are well insulated before connecting the ESC to related devices, as the short circuit will damage your ESC.
• Ensure all devices are well connected, in order to prevent poor connections that may cause your vehicle to lose control or other unpredictable issues like damage to the device.
• Read through the manuals of all power devices and chassis and ensure the power configuration is rational before using this unit.
• Please use a soldering iron with the power of at least 60W to solder all input/output wires and connectors.
• Do not hold the vehicle in the air and rev it up to full throttle, as rubber tires can “expand” to an extreme size or even crack to cause serious injury.
• Stop using the ESC when its casing temperature exceeds 90℃/194℉; Otherwise, your ESC will get destroyed and may also get your motor damaged. We recommend setting the
• “ESC Thermal Protection” to 105℃/221℉ (this refers to the internal temperature of the ESC).
• We recommend removing the cooling fan from ESC before exposing the vehicle to liquids and fully dry it right after the use.
• Always disconnect and remove batteries after use, as the ESC will continue to consume current if it's still connected to the batteries (even if the ESC is turned off). Long-time contact will cause batteries to completely discharge and result in damage to batteries or ESC. This will not be covered under warranty